Charging in the car's centre display
From the centre display it is possible to set the state of charge (SoC), unlock the charging cable and set amperage.
To access the charging view in the car's centre display, tap on 
and then on Charging. When charging is started, the view for charging is also activated in the car's centre display.
Setting the state of charge (SoC)
The battery's current charge status.
Swipe to set the preferred state of charge (SoC). The state of charge (SoC) remains unchanged until next time, unless it is changed in the centre display.
Schedule charging
When charging with alternating current, it is possible to schedule charging and set start and stop times for when charging should take place. Tap on Set timer to schedule charging.
Unlocking the charging cable
Tap on Unlock cable in the centre display to unlock the charging cable and end the charging in progress.
Setting the amperage
When charging with alternating current1, it is possible to limit the maximum amperage the car can be charged with. Tap on + to increase the amperage or - to reduce the amperage2.
Note
The amperage may be limited by the charging station or charging cable. There is no guarantee that the car can be charged with the specified amperage if it is higher than permitted by the charging station or charging cable.