Symbols and messages for electronic stability control

A number of symbols and messages regarding electronic stability control (ESC1) can be shown on the driver display. Here are some examples.
SymbolMessageSpecification
Px-2037-iCup-Electronic Stability Control symbol
Constant glow for approx. 2 seconds

System check when the car is started.

Px-2037-iCup-Electronic Stability Control symbol
Flashing lightThe system is being activated.
Px-2037-iCup-Electronic Stability Control symbol
ESC Service required

The system is disengaged. Stop the car at a safe place.

Check whether the error was temporary or if it persists by getting out of the car, locking it, unlocking it and getting back in.

If the problem persists, contact a workshop – an authorised Volvo workshop is recommended.

The car can be driven but without the ESC functionality.

A text message can be cleared by briefly pressing the P5–1507–Symbol-OK button button, located in the centre of the steering wheel's right-hand keypad.

If a message remains, contact a workshop - an authorised Volvo workshop is recommended.

  1. 1 Electronic Stability Control