Deactivating/reactivating the speed limiter

Updated 08/06/2023

The speed limiter (Speed Limiter - SL) can be temporarily deactivated so that it is set in the standby mode and can be reactivated later.

P5-1546-SL rattknappar-1 — NOTE: The illustration is schematic - details may vary depending on car model.

Deactivate the speed limiter and set it in standby mode

Press the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V

(2).

The speed limit markings and symbols in the driver display change colour from WHITE to GREY - the speed limiter is now temporarily deactivated and the driver can exceed the maximum speed setting.

Reactivating the speed limiter from standby mode

Press the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp Återuppta hastighet

(1).

The driver display's speed limit markings change colour from GREY to WHITE - the car's speed is then limited again by the last stored maximum speed.

Press the steering wheel button P5-1507-Symbol 5x3,5-CC rattknapp Centrum-V

(2).

The speed limiter indicators and symbols in the driver display change colour from GREY to WHITE — the car will now apply its current speed as the maximum speed.

Temporary increase in speed with the accelerator pedal

The speed limiter can also be temporarily overridden with the accelerator pedal without the speed limiter being set in standby mode - e.g. to be able to quickly accelerate the car out of a situation. In which case, proceed as follows:

Fully depress the accelerator pedal and release it so that acceleration is interrupted when the desired speed has been reached.

In this case, the speed limiter is still activated and the driver display's symbol is therefore WHITE.

Fully release the accelerator pedal when the temporary acceleration is finished.

The car is then braked automatically below the last stored maximum speed.