The driver display contains gauges, indicators and indicator and warning symbols. The content of the driver display depends on the car's equipment, settings and which functions are active at that time.
Warning
In the event of a fault in the driver display the information on e.g. brakes, airbags or other safety systems may not be shown. In which case, the driver cannot check the status of the car's systems or receive current warnings and information.
Warning
If the driver display should extinguish, not illuminate on activation/start or be fully or partially illegible, the car must not be used. You should visit a workshop immediately. Volvo recommends an authorised Volvo workshop.
| On the left | In the middle | On the right |
|---|---|---|
| Speedometer | Indicator and warning symbols | Tachometer1 |
| Trip meter | Outside temperature gauge | Hybrid gauge1 |
| Odometer | Clock | Gear shift indicator |
| Cruise control and speed limiter information | Messages, in some cases with graphics | Drive mode (Hybrid, Off Road, Pure, Power or AWD) |
| Road Sign Information* | Door and seatbelt information | Fuel gauge |
| – | Charge status | Hybrid battery gauge |
| – | Media player | Distance to empty tank |
| – | Navigation map* | Distance to empty battery |
| – | Phone | Instantaneous fuel consumption |
| – | Voice recognition | App menu (activated via steering wheel keypad) |
| – | Compass1 | – |
Location of adaptable symbol
In the centre of the driver display, different symbols can be shown for different types of message. It may be in the form of an indicator or warning symbol, or consist of an image sequence that starts from this position and is then converted to a larger image.
Activating the driver display
The driver display is activated as soon as a door is opened, i.e. in ignition position 0. The driver display extinguishes after a while if it is not used. To reactivate it, proceed with one of the following:
- Depress the brake pedal.
- Turn the ignition knob to ignition position to I.
- Open one of the doors.