Using the rain sensor
Rain sensor button
Thumbwheel sensitivity/frequency
When the rain sensor is activated, the rain sensor symbol 
is shown in the driver display.
The rain sensor is automatically on or off when the car is started depending on rain sensor mode set when the car was switched off.
Activating the rain sensor
To activate the rain sensor, the windscreen wipers must be in position 0, or in the position for single sweep.
Activate the rain sensor by pressing the rain sensor button 
.
Move the lever down to make the wipers move.
Turn the thumbwheel upward for higher sensitivity and downward for lower sensitivity. An extra sweep is made when the thumbwheel is turned upward.
Deactivating the rain sensor
Deactivate the rain sensor by pressing the rain sensor button or moving the stalk switch up to another wiper program.
The rain sensor is deactivated automatically when the car is switched off.
The rain sensor is deactivated automatically when wiper blades are set in service position. The rain sensor is reactivated when service mode has been deactivated.