Make sure the compressor power button is in the off position before starting.
Unscrew the valve cap from the tire and attach the air hose to the tire air valve. Screw the connector as far down the thread as possible.
Attach the hose directly onto the compressor's bottle holder and turn clockwise 90 degrees.
Connect the compressor to the vehicle's 12 V outlet and start the vehicle.
Start the compressor by pressing the power button.
Important
To avoid overheating, do not run the compressor for more than 10 minutes at a time.
Check the tire pressure on the compressor's pressure gauge1. Use the pressure-reducing valve if the pressure is too high.
Turn off the compressor and unplug it from the 12 V socket.
Unscrew the air hose from the tire.
Replace the tire valve cap.
Store a new reference value in the tire pressure monitoring system if needed.
Return the kit to its storage location.