You can control some primary lighting modes behaviours using the left-hand steering wheel stalk.
You can move the left-hand stalk forwards or backwards to switch between different lighting selections. The stalk always springs back to the neutral position.
The selections available are:
- High beam
- High beam flash
When the automatic lights mode is selected in the display, push the stalk twice to switch the high beam on or off.
Pull the stalk fully to turn high beam off and return to the automatic lights mode.
From the automatic lights mode, a short pull of the stalk activates the high beam flash.
The lights settings will reset to their default values between drives.
Important
Make sure that the car cameras are well-maintained and kept clean. If the cameras’ views are obscured by dirt, they will not be able to obtain enough information to properly direct the car’s lighting responses.