Tire sealing system – checking inflation pressure
The tire sealing system can also be used to check the tires' inflation pressure.
Stage 2: Checking inflation pressure
Reconnect the tire sealing system's hose to the tire's inflation valve as described in stage 1, see Tire sealing system* – sealing a hole.
Refer to the inflation pressure table in this chapter for the correct inflation pressure. If the tire needs to be inflated, start the tire sealing system’s compressor. If necessary, release air from the tire by turning the air release knob counterclockwise.
Important
The compressor should not be used for more than 10 minutes at a time to avoid overheating.
Warning
If you interrupt your trip for more than 1 hour, check the inflation pressure in the damaged tire again before continuing.