Trip computer – functions, digital instrument panel

The content and appearance of the trip computer varies depending on whether the vehicle is equipped with an Analog or Digital instrument panel.
P3-1320-ALL-trip computer digital
Information displays and controls
  1. Ikon röd cirkel 1OK–press to access the trip computer's functions or to activate a selection
  2. Ikon röd cirkel 2Thumb wheel–turn to access the list of trip computer information headings and to scroll among the alternatives
  3. Ikon röd cirkel 3RESET–press to cancel/reset/exit a function after a selection has been made

The trip computer has two different menu groups:

  • Trip computer functions
  • Trip computer information headings in the instrument panel

Functions

To open and make settings in the trip computer functions:

Ensure that none of the trip computer controls are being used in a command sequence; reset them by pressing RESET twice.
Press OK to open the list of functions.
Use the thumb wheel to scroll among the functions and select/confirm your choice by pressing OK.
After completing your selection, exit by pressing RESET twice.

The following table lists the digital trip computer's functions:

FunctionDescription
Trip computer reset

– Average fuel consumption

– Average speed

NOTE: This function does not reset the trip odometers, see Trip computer – Supplementary information for a description of how this is done.
Messages
For additional information, see Information display – menu controls.
Themes
Set the way in which information is displayed in the instrument panel, see Information displays – introduction.
Settings*
Select Auto On or Off.
Contrast mode/Color mode
Adjust the instrument panel's contrast and color.
Service status
Shows the number of months and mileage until the next scheduled service.

Information headings

Three trip computer headings can be displayed at the same time; one in each of the displays (see the previous illustration). One of the combinations of information headings in the following table can be displayed. To do so:

Ensure that none of the trip computer controls are being used in a command sequence; reset them by pressing RESET twice.
Turn the thumb wheel to begin displaying the combinations of information headings. Stop on the desired combination.
See the table for an explanation of the heading or the actions that can be taken.

Scroll among the combinations of trip computer information headings at any time by turning the thumb wheel until the desired combination is displayed.

Heading combinationsDescription
Average fuel consumptionTrip odometer T1 + mileageAverage speed
  • Press and hold RESET to reset trip odometer T1.
Current fuel consumptionTrip odometer T2 + mileageDistance to empty
  • Press and hold RESET to reset trip odometer T2.
Current fuel consumptionMileage mph<>km/hChange between mph<>km/h – see "Digital speed display" in Trip computer – Supplementary information.
-No trip computer information displayed-No information will be displayed. This also indicates the beginning/end of the list of information headings.

Scroll among the trip computer information headings at any time by turning the thumb wheel until the desired heading is displayed.

  1. * Option/accessory.