Adaptive Cruise Control – symbols and messages
Symbols and messages in the display
A text message can be erased by pressing briefly on the OK button on the turn signal lever.
Symbol | Message | Description |
---|---|---|
Green symbol | A speed has been set. | |
White symbol | ACC is in standby mode but no speed has been set. | |
- | Standard cruise control has been selected manually. | |
- | Set ESC to Normal to enable Cruise | ACC cannot be put in active mode until the stability system is switched normal operating mode, see Stability system – introduction for more information. |
- | Cruise control Cancelled | ACC has been automatically switched off. The driver has to regulate the vehicle’s speed/distance to the vehicle ahead. |
- | Cruise control Unavailable | ACC cannot be put in active mode. This may be due to:
|
Radar blocked See manual | ACC has been temporarily disconnected because the radar is obstructed in some way and cannot detect other vehicles. In this situation, the driver can switch to standard cruise control, see Toggling between ACC and CC (standard Cruise Control) See Adaptive Cruise Control – limitations for information on the radar sensor’s limitations. | |
- | Cruise control Service required | ACC is not functioning. Contact a trained and qualified Volvo service technician. |
- | Press Brake To hold + an audible signal | The vehicle is at a standstill and ACC will release the brakes before the parking brake engages to keep the vehicle stopped but a problem with the parking brake means that the vehicle may begin to roll. The driver will have to apply the brakes. The message will remain in the display and the audible signal will continue until the driver applies the brakes or presses the accelerator pedal. |
- | Below 30 km/h Only following | This is displayed if you try to activate ACC at speeds below approx. 18 mph (30 km/h) without a vehicle ahead within range (approx. 100 ft/30 meters). |