Cruise control (CC) – deactivating
Cruise control is designed to assist the driver by maintaining a set speed. It is primarily intended for use on long straight roads in steady traffic, such as on highways and other main roads.
Automatic deactivation
The cruise control is automatically deactivated temporarily if one of the following occurs:
- If the speed drops below approximately 20 mph (30 km/h).
- When the brake pedal is depressed.
- If the gear selector is moved to position N.
- During wheel spin or wheel lock-up.
- If the vehicle's speed is increased by using the accelerator pedal for more than 1 minute.
- Engine speed (rpm) is too high or too low.
The currently set speed will be saved in the system's memory.
Temporary deactivation
The driver can temporarily deactivate the cruise control by pressing 0. The saved speed is shown in brackets in the information display.
Resume set speed
If the cruise control has been deactivated temporarily, it can be reactivated by pressing 
. The vehicle's speed returns to the most recently set speed.
Warning
There may be a significant increase in speed after the button has been pressed.
button has been pressed.Deactivation
The Cruise control is disengaged by pressing 
or by switching off the engine. The set speed is cleared.
Warning
Cruise control should not be used in heavy traffic or when driving on wet or slippery roads. Cruise control may not maintain set speed on steep downgrades.