Tire specifications

Updated 2023-06-08

The following information can be found on a tire's sidewall.

Tire ratings

The speed ratings in the table translate as follow:

Federal law mandates that tire manufacturers place standardized information on the sidewall of all tires (see the illustration).

The following information is listed on the tire sidewall:

The tire designation:

Please be aware that the following tire designation is an example only and that this particular tire may not be available on your vehicle.

1.	215: the width of the tire (in millimeters) from sidewall edge to sidewall edge. The larger the number, the wider the tire.
2.	65: The ratio of the tire's height to its width in percent.
3.	R: Radial tire (the designation RF and the symbol indicate that the vehicle is equipped with optional self-supporting run flat tires1.
4.	15: The diameter of the wheel rim (in inches).
5.	95: The tire's load index. In this example, a load index of 95 equals a maximum load of 1521 lbs (690 kg).
6.	H: The tire's speed rating, or the maximum speed at which the tire is designed to be driven for extended periods of time, carrying a permissible load for the vehicle, and with correct inflation pressure. For example, H indicates a speed rating of 130 mph (210 km/h).

The tire's load index and speed rating may not appear on the sidewall because they are not required by law.

7.	M+S or M/S = Mud and Snow, AT = All Terrain, AS = All Season
8.	U.S. DOT Tire Identification Number (TIN): This begins with the letters "DOT" and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built. For example, 1510 means that the tire was manufactured during week 15 of 2010. The numbers in between are marketing codes used at the manufacturer's discretion. This information helps a tire manufacturer identify a tire for safety recall purposes.
9.	Tire Ply Composition and Material Used: Indicates the number of plies indicates or the number of layers of rubber-coated fabric in the tire tread and sidewall. Tire manufacturers also must indicate the ply materials in the tire and the sidewall, which include steel, nylon, polyester, and others.
10.	Maximum Load: Indicates the maximum load in pounds and kilograms that can be carried by the tire. Refer to the vehicle's tire information placard located on the B-Pillar for the correct tire pressure for your vehicle.
11.	Treadwear, Traction, and Temperature grades: see Tire specifications – Uniform Tire Quality Grading for more information.
12.	Maximum permissible inflation pressure: the greatest amount of air pressure that should ever be put in the tire. This limit is set by the tire manufacturer.