Selecting and activating speed-controlling functions

When a particular speed-controlling function is preferred, it can be selected in the center display before being activated with the steering wheel button. This applies for cruise control (CC1), Pilot Assist* and Adaptive Cruise Control*.

Tap iCup-2037-Settings symbol in the center display.
Tap Driving and activate your preferred function.
When the desired function is selected, press P5-1507-Cruise Control, speed limiter, activates speed limiter and stores current speed symbol 5x3,5 on the steering wheel keypad to activate.
The symbol in the instrument panel lights up – the function starts and the current speed is stored as the maximum speed.
If the function goes into standby mode – press the P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5 button on the steering wheel to reactivate.
The speed-controlling markings in the instrument panel illuminate and the vehicle will then return to the most recently set speed.
Use the steering wheel button P6-2037-XC40BEV-Steering wheel left buttons, right arrow to switch between Pilot Assist* and Adaptive Cruise Control*.
To always get Pilot Assist when activating speed-controlling functions at each new driving cycle:
Tap iCup-2037-Settings symbol in the center display.
Tap Driving.
Activate Pilot Assist as default.

 Warning

A noticeable increase in speed may follow when the speed is resumed with the P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5 steering wheel button.

Requirements

Certain conditions must be met in order to start any of the functions.

Cruise control

  • In order to start Cruise Control from standby mode, the vehicle's current speed must be 30 km/h (20 mph) or higher.

Adaptive Cruise Control

  • The driver's seat belt must be buckled and the driver's door must be closed.
  • There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).

Pilot Assist

  • The driver's seat belt must be buckled and the driver's door must be closed.
  • The side markings of the lane must be clearly visible and detected by the vehicle.
  • There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).
  • The speed must not exceed 140 km/h (87 mph).
  • The driver must keep their hands on the steering wheel.
  1. 1Cruise Control
  2. *Option/accessory.