Using stored positions for seats, mirrors and head-up display*
If the positions for the power* seat, door mirrors and head-up display* have been stored, they can be easily activated using the memory buttons.
Using a stored position
A stored position can be used with the front door open or closed:
Front door open
Briefly press one of the memory buttons 1 (
) or 2 (
). The power seats, door mirrors and head-up display will move and stop at the positions stored in that button.
) or 2 (). The power seats, door mirrors and head-up display will move and stop at the positions stored in that button.Front door closed
Press and hold one of the memory buttons 1 () or 2 () until the seat, door mirrors and head-up display stop in the positions stored in that memory button.
) or 2 () until the seat, door mirrors and head-up display stop in the positions stored in that memory button.If the memory button is released, the seat, door mirrors and head-up display will stop moving.
Warning
- This list point needs to be translated exactly to: "Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
- The seat rails on the floor must not be obstructed in any way when the seat is in motion.