Using a stored position
A stored position can be used with the front door open or closed:
Front door open
Briefly press one of the memory buttons 1 (
) or 2 (
). The power seats, door mirrors and head-up display will move and stop at the positions stored in that button.
) or 2 (). The power seats, door mirrors and head-up display will move and stop at the positions stored in that button.Front door closed
Press and hold one of the memory buttons 1 () or 2 () until the seat, door mirrors and head-up display stop in the positions stored in that memory button.
) or 2 () until the seat, door mirrors and head-up display stop in the positions stored in that memory button.If the memory button is released, the seat, door mirrors and head-up display will stop moving.
Warning
- This list point needs to be translated exactly to: "Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
- The seat rails on the floor must not be obstructed in any way when the seat is in motion.
Note
For the stored positions to work, all driver profiles need to be in Protect Profile mode.