Rear Park Assist Camera (PAC) – operation

The Park Assist Camera is designed to provide the driver with a view of the area behind the vehicle when backing up.

Activation

If PAC is not activated when the gear selector is moved to R, it can be activated as follows:

P4-1420-Huvudkällmeny PAC
Main source menu
  1. Press and hold EXIT once or twice if necessary to come to the main source menu.
  2. Scroll to Camera using the thumb wheel on the steering wheel keypad or the TUNE control on the center console and press the thumb wheel or OK/MENU.
  3. In the menu that is displayed, scroll to the desired camera view using the thumb wheel or TUNE. Select the view by pressing the thumb wheel or OK/MENU.

Zoom

When necessary, the camera view can be zoomed:

  • Turn the thumb wheel on the steering wheel keypad TUNE. Turning again returns you to normal view.

If there are additional alternatives, turn until the desired camera view is displayed.

Trailer hitches

The camera can be useful when attaching a trailer. With the camera zoomed in on the trailer hitch, a guiding line showing the hitch's path toward the trailer will be projected.

The guiding lines for the wheels and for the trailer hitch cannot be displayed at the same time. To select a view:

  1. Press OK/MENU when a camera view is displayed.
  2. Turn TUNE to scroll to Tow bar trajectory guide line.
  3. Confirm by pressing OK/MENU and press EXIT.

Zoom

When necessary, the camera view can be zoomed:

  • Press CAM or turn TUNE. Pressing or turning again returns you to normal view.

If there are additional alternatives, press/turn until the desired camera view is displayed.

Automatic zoom

Automatic zoom is a feature that is available on models equipped with a trailer hitch and the optional Park assist system. With this alternative selected, the camera will zoom in on the trailer hitch automatically if the vehicle approaches an object/trailer.

See also the "Settings" section below.

Deactivation

Move the gear selector from R to another gear. The camera remains active for approx. 5 seconds after the gear selector has been moved from R or until the vehicle's forward speed exceeds 6 mph/10 km/h (21 mph/35 km/h in reverse). The screen will then revert to the view that was displayed before R was selected.

 Note

If any button on the center console control panel is pressed, the camera image will disappear from the display. Pressing CAM will return the camera image to the display.

Settings

By default, PAC is set to activate when the gear selector is moved to R

To change PAC settings when a camera view is displayed:

  1. Press OK/MENU when a camera view is on the screen. A menu will be displayed.
  2. Turn TUNE to scroll to the desired setting.
  3. Press OK/MENU to make the setting and exit the menu by pressing EXIT.

Summary

  • Pressing CAM will activate the camera even if the gear selector is not in Reverse.
  • Toggle between normal view and zoom by pressing CAM or by turning TUNE.