Drive modes
Available drive modes
There are four available drive modes: Hybrid, Pure, Power1 and Constant AWD*.
Each drive mode is adapted to help optimize driving characteristics in terms of:
- steering
- engine/transmission/all-wheel drive
- brakes
- shock absorbers
- instrument panel
- climate control settings.
Warning
Indication in the instrument panel
The selected drive mode is indicated in the instrument panel.
Hybrid
The vehicle starts in Hybrid mode. Both the electric motor and the gasoline engine are used – separately or in tandem – and utilization is adapted with regard to performance, fuel consumption and comfort. Driving capacity on the electric motor alone is determined by factors such as the hybrid battery's charge level, the need for heat or cooling in the passenger compartment, etc. The gasoline engine will start when the vehicle's power output exceeds the hybrid battery's capacity. In Hybrid mode, the capacity is adapted to, e.g., the hybrid battery's charge level and the vehicle's speed.
Volvo recommends using Hybrid mode for daily driving.
To keep in mind when using Hybrid mode
- all-wheel drive is automatically engaged as needed
- at low charge levels, the hybrid battery starts the gasoline engine more frequently. Charge the vehicle or activate Charge under Battery usage in the center display to drive on the electric motor alone.
- at high charge levels, the vehicle can run on electricity alone. The gasoline engine will start when the current in the battery cannot supply the power requested by the accelerator pedal.
- lightly depressing the brake pedal regenerates energy back to the hybrid battery.
Pure
In Pure mode, use of the vehicle's electric motor is prioritized. This drive mode is available when the hybrid battery is sufficiently charged. If the charge level of the battery is too low, the vehicle's characteristics are adapted to lower energy consumption as much as possible.
Volvo recommends using Pure mode for daily driving.
To keep in mind when using Pure mode
- some climate settings are adjusted
- on slippery roads, slightly more wheel spin may be permitted before all-wheel drive is activated
Pure mode is available as long as the hybrid battery has a high enough charge level and power, which can be affected by temperature. When the gasoline engine starts, the vehicle automatically switches to Hybrid mode until it is possible for the driver to select Pure mode again.
- when the vehicle is started, and should be running for a few minutes for optimal exhaust gas treatment.
- if the battery's charge level is too low
- if the driver presses the accelerator pedal all the way down.
- if the battery's charge level is too low
- if the vehicle's speed exceeds 140 km/h (87 mph) (does not apply on downhill gradients, etc.)
- if factors such as cold weather affect the system or components.
Note
Note
Power2
Power mode adjusts the combined output of the electric motor and the gasoline engine to enhance performance and response during acceleration as much as possible. Gear shifting will be faster and more distinct and the transmission will prioritize gears with a higher traction force. Steering response is faster and suspension is stiffer.
Volvo recommends Power mode when sportier driving characteristics and faster acceleration response are desired.
To keep in mind when using Power mode
- fuel consumption may increase.
Constant AWD*
Constant AWD mode improves the vehicle's traction with increased all-wheel drive. An adapted distribution between front and rear axle torque provides effective control, stability and traction.
Volvo recommends using Constant AWD mode on slippery roads or when towing a heavy trailer or another vehicle.