Driving through standing water

It may be necessary to drive the vehicle through standing water e.g. deep puddles or flooding on the road. This must be done with great caution.

When driving through standing water

To help prevent damage to the vehicle when driving through water:

  • Do not drive in water higher than the floor of the vehicle. If possible, check the depth of the water at its deepest point before driving through it.
  • Do not drive faster than walking speed.
  • Do not stop the vehicle in the water. Drive carefully forward or back the vehicle out of the water.
  • Be particularly careful when driving through flowing water.
  • Remember that waves created by passing vehicles could cause the water level to rise above the vehicle's floor level.
  • Avoid driving through salt water to help avoid the risk of corrosion.

 Important

Parts of the vehicle (e.g. engine, transmission, driveline, electrical components, etc.) can be damaged if the vehicle is driven through water higher than its floor level. Damage to any components caused by flooding, vapor lock or insufficient oil is not covered under warranty.

If the engine stalls while the vehicle is in water, do not attempt to restart it. Have the vehicle towed on the bed of a tow truck to a workshop - an authorized Volvo workshop is recommended.

 Important

Because it can be difficult to determine the water depth, Volvo recommends not driving through standing or running water. The driver is always responsible for operating the vehicle in a safe manner and adhering to all applicable laws and regulations.

After driving through standing water

When you have passed the water, press lightly on the brake pedal and check that the brakes are functioning properly. Water, mud, slush, etc. can make the brake linings slippery, resulting in delayed braking effect.

If the vehicle is equipped with a trailer coupling contact, clean the contact after driving in water or mud.

Related documents