Gear selector positions for automatic transmissions

In vehicles with an automatic transmission, the system selects the optimal gear for the current driving conditions. The transmission also has a manual mode.
P5-1519-XC90-Hybrid gear shifter with gear shift modes

The instrument panel shows which gear is currently in use:

P, R, N, D or B.

For manual shifting, the gear indicator in the instrument panel displays the gear currently being used (1-8).

Selecting gears

The gear selector is a shift-by-wire selector, where shifting is done electronically instead of mechanically. This makes shifting easier and the gear positions more distinct.

Select gears by moving the spring-loaded, non-locking gear selector forward or backward.

P5-1746-All hybrid- Gear shifter RNDB

Gear selector positions

Park - P

P5-1746-All hybrid- Gear shifter P

Park is activated using the P button located next to the gear selector.

Select P when the vehicle is parked or when starting the engine. The vehicle must be stationary when Park is selected.

To move to another gear from Park, the brake pedal must be depressed and the ignition in mode II.

When parking – apply the parking brake before shifting to Park.

 Warning

Always apply the parking brake when parking on an incline. Selecting a gear or putting the automatic transmission in P may not be sufficient to keep the vehicle stationary in all situations.

 Note

The gear selector must be in the P position before the vehicle can be locked and the alarm set.

Help functions

The system will automatically shift to P:

  • if the ignition is switched off while D or R is selected.
  • if the driver unbuckles the seat belt and opens the driver's door while the vehicle is running with the gear selector in a gear other than P.

To park a vehicle with an unbuckled seat belt and open door – end P mode by shifting to R or D again.

Reverse - R

Select R when backing up. The vehicle must be stationary when Reverse is selected.

Neutral - N

No gear is selected and the engine can be started. Apply the parking brake if the vehicle is stationary with the gear selector in N.

To move the gear selector from Neutral to another gear, the brake pedal must be depressed and the ignition in mode II.

D drive mode

D is the normal driving gear position. The transmission shifts up or down automatically depending on acceleration and speed. The vehicle must be stationary when the gear selector is moved from R to D.

Brake - B

B can be selected at any time during a drive. In B mode, the engine braking function is activated when the accelerator pedal is released, which helps charge the hybrid battery. This offers additional opportunities to recharge the hybrid battery, since the battery is charged even when the brake pedal is not depressed.

P5-1519-XC90 Hybrid gear shift B-mode in DIM
B mode in the instrument panel.

From B mode, it is possible to manually shift to lower gears. The currently selected gear (1-8) will be displayed in the instrument panel.

  • Pull the gear selector backward once to shift down one gear.
  • Pull the gear selector backward again to shift down to lower gears.

To shift manually to a higher gear, the vehicle must be equipped with steering wheel paddles*.

  • Push the gear selector forward to return to D mode.

For smooth shifting and engine performance, the transmission will shift down automatically if the vehicle's speed becomes too low for the selected gear.

  1. * Option/accessory.

Related documents