Leveling control* and suspension
Self-leveling and suspension functions are controlled automatically.
Rear leveling control keeps the rear section of the vehicle at the same height regardless of load. Leveling control may also remain active when the vehicle is parked.
Shock absorbers (Four-C)
The shock absorbers are adapted to the selected drive mode and vehicle speed. The shock absorbers are normally set to provide the best possible comfort and are adjusted continuously according to the road surface and the vehicle's acceleration, braking and cornering.
Transporting
When transporting the vehicle on a ferry, train or truck, only secure (lash) the vehicle around the tires, not using any other parts of the chassis. Changes in the pneumatic suspension may occur during transport, which could adversely affect the lashing and result in damage.
Symbols and messages in driver display
Symbol | Message | Meaning |
---|---|---|
Suspension Deactivated by user | Level control has been switched off manually by the user. | |
Suspension Temporarily reduced performence | Level control performance has been temporarily reduced due to extensive system use. If this message appears frequently (e.g. several times in one week) contact a workshop1. | |
Suspension Service required | A fault has occurred. Visit a workshop1 as soon as possible. | |
Suspension failure Stop safely | A critical fault has occurred. Stop safely, and have the car transported (raised with all wheels on the flatbed) to a workshop1. | |
Suspension Slow down Vehicle too high | A fault has occurred. If the message appears while driving, contact a workshop1. | |
Suspension Auto adjusting vehicle level | Level control of the car's rear axle to target height is in progress. |