The Launch function*
Launch can be used to provide maximum acceleration from a standstill. The function is available for the drive modes: Hybrid, Constant AWD and Power.
Activating Launch
Make sure that the vehicle is stationary and that the wheels are pointing straight ahead.
Put the gear selector in D position.
Depress the brake pedal fully.
Then fully depress the accelerator pedal.
Release the brake pedal within 2 seconds.
Note
If the Launch function does not work, wait a few minutes to let the driveline reach working temperature before trying again.
Important
The driveline is exposed to wear when using Launch and the function is therefore only available a limited number of times.