Changing Automatic Speed Limiter tolerance

The Automatic Speed Limiter (ASL1) can be set to different tolerance levels.

It is also possible to allow the vehicle to drive above or below the posted speed limit. For example, if the vehicle is following a current posted speed limit of 70 km/h (43 mph), the driver can instead allow the vehicle to maintain a speed of 75 km/h (47 mph).

P5-1546-ASL rattknappar
Function buttons and symbols2.
Tap the P5-1507-Symbol 5x3,5-CC rattknapp + (1) button on the steering wheel keypad until 70 km/h (43 mph) has been changed to 75 km/h (47 mph) in the center of the speedometer (4).

The vehicle will then use the selected tolerance of 5 km/h (4 mph) as long as the posted speed limit the vehicle passes is 70 km/h (43 mph).

This tolerance level will be followed until the vehicle passes a sign with a lower or higher speed. The vehicle will then adjust to the new speed limit and the set tolerance will be deleted from the system's memory.

If Road Sign Information* is activated, the posted speed limit will then be indicated by a RED marking on the speedometer's speed scale.

The set tolerance can be adjusted in the same way as for the Speed Limiter's speed.

 Note

The highest possible selectable tolerance is +/- 10 km/h (5 mph).
  1. 1 Automatic Speed Limiter
  2. 2 Note: This illustration is general and details may vary depending on model.
  3. * Option/accessory.

Related documents