Reset procedure for pinch protection
If the power windows are not operating properly, you can try a reset procedure.
The power sun curtains* also have a reset procedure that can be tested in case of problems.
Warning
If the starter battery is disconnected, the function for automatic opening and closing must be reset to function correctly. A reset is required in order for the pinch protection to work.
If the problem persists or if it affects the panoramic roof or sunroof, contact a workshop.1
Resetting a power window
Start with the window in the closed position.
Then operate the window in manual mode three times upward toward the closed position.
The system will be automatically initiated.
Resetting a sun curtain
Begin with the sun curtain* in the retracted position.
Press and hold the lowering control for approx. 15 seconds.
The system will be automatically activated.