Connecting the Volvo Cars app to the vehicle

There are different ways of connecting the Volvo Cars app to the vehicle.

The steps vary depending on car model and model year, so make sure to read the section that applies to your car.

If you have connected the app with more than one vehicle and want to switch between them, see the following section for more information:

EX90

Adding a vehicle in the Volvo Cars app

When you add a vehicle in the app, you connect the app to the vehicle.

Before adding a vehicle in the Volvo Cars app, your Volvo ID needs to be connected to the owner profile. This will be done by Volvo Cars when you buy or lease a car directly from them. If you buy the car from a retailer, they should help you set this up. If you're not connected to the car through a Volvo Cars ordering process or via a retailer, you need to connect your Volvo ID to the owner profile yourself.

Make sure to follow the instructions that apply to your situation.

Follow the steps below if you've bought or leased your car directly from Volvo Cars or a retailer.
Sit in the driver's seat with your car key.
Follow the instructions in the center display to set up the owner profile.
You'll be asked to log in with your Volvo ID. This will connect your Volvo ID to the profile.
Log in to the Volvo Cars app on your phone with the same Volvo ID to see the connected car.
You now have full access to the car.
Follow the steps below if you're not connected to the car through a Volvo Cars ordering process or via a retailer.
Sit in the driver's seat with all your car keys.
Follow the instructions in the center display to set up the owner profile.
  • You'll first be asked to register as the car's owner (this may not necessarily refer to the legal owner).
  • Next, you'll be asked to log in with your Volvo ID. This will connect your Volvo ID to the profile.
In the car's center display, follow the instructions on the welcome screen.
Log in to the Volvo Cars app with the same Volvo ID to see the connected car.
You now have full access to the car.

If you have an owner profile, you can now share Volvo Cars app access to your car with other drivers.

Applicable models

EX90, model year 2025 and later

All cars with Google built-in except EX90

Performing a factory reset of a pre-owned car

If the previous owner hasn't removed their data from the vehicle, a factory reset of the vehicle is needed. You can do this yourself via the vehicle's center display. It's also recommended to ask the previous owner to remove the vehicle in the Volvo Cars app. For more information, see:

Pairing the Volvo Cars app with the car for the first time

When you pair the app, you connect the app to the vehicle.

Follow these instructions if you've never paired the app with the car before. The process may vary depending on:

  • If you've not paired the app with any car before.
  • If you've paired the app with other cars before.

Make sure to follow the instructions that apply to your situation. If you've paired the app with your vehicle before or if the pairing process was incomplete, see:

Log in to the Volvo Cars app with your Volvo ID.
  • If you've not paired the app with any car before, press Add your car on the welcome screen.
  • If you've paired the app with other cars, go to the profile tab Px-2037-VOC app icon Profile > Your cars > Add car.
Add your car's vehicle identification number (VIN) and follow the instructions in the app.
  • Admin users: If you want to connect as an admin, sit in the driver's seat with all the car keys. This is necessary to set up the admin profile.
  • Other users: If you want to connect as an additional driver, sit in the car with one car key.

Re-pairing the Volvo Cars app with the car or completing the pairing process

When you pair the app, you connect the app to the vehicle.

Follow these instructions if you've previously paired the app with the car and you want to pair it again, or if the pairing process was incomplete.

Log in to the Volvo Cars app with your Volvo ID.
Go to the profile tab Px-2037-VOC app icon Profile > Your cars.
Select your car and press Select car.

Press Continue pairing and select the scenario that applies to you:

  • I deleted the app
  • I have replaced my old phone
  • I want and additional phone paired
  • None of the above
Tap Next and follow the instructions in the app.

Enabling data sharing for the Volvo Cars app

Data sharing for the Volvo Cars app needs to be enabled in order for the app to access data from the vehicle. This is needed for functions such as climate and lock/unlock doors.

In the center display, press the settings symbol iCup-2037-Settings symbol > Privacy > Volvo privacy settings > Volvo Cars app.
Make sure that data sharing is enabled.

Applicable models

C40, model year 2022-2024

EC40, model year 2025 and later

EX40, model year 2025 and later

S60, S60 Recharge, model year 2023 and later

S90, S90 Recharge, model year 2022 and later

V60, V60 Recharge, V60 Cross Country, model year 2023 and later

V90, V90 Recharge, V90 Cross Country, model year 2022 and later

XC40Recharge Pure Electric, model year 2021-2024

XC40 (mild hybrid), model year 2023 and later

XC60, XC60 Recharge, model year 2022 and later

XC90, XC90 Recharge, model year 2023 and later

Vehicles with the earlier infotainment system (Sensus)

Performing a factory reset of a pre-owned car

If the previous owner hasn't removed their data from the vehicle, a factory reset of the vehicle is needed. You can do this yourself via the vehicle's center display. It's also recommended to ask the previous owner to remove the vehicle in the Volvo Cars app. If the previous owner removes the vehicle, you may still need to perform a factory reset if they haven't already done so. For more information, see:

Adding a vehicle in the Volvo Cars app

When you add a vehicle in the mobile app, you connect your Volvo ID to the vehicle.

You need to have a Volvo ID to log in to the app. For more information, see:

 Note

If a retailer or Volvo support has connected your Volvo ID to your vehicle, you won't need to add your vehicle in the Volvo Cars app. You'll see your connected vehicle in the app when you log in.
Follow the steps below to add a vehicle in the app.
Log in to the Volvo Cars mobile app with your Volvo ID.
  • If you've not connected the app with other vehicles before, press Add your car on the welcome screen.
  • If you've connected the app with other vehicles before, go to the profile tab Px-2037-VOC app icon Profile > Your cars > Add car.
Add your vehicle's vehicle identification number (VIN) and follow the instructions in the mobile app.

Accessing all functions in the app

To access all functions in the app, you need to have an active subscription for connected services.

To see your subscription status, go to the vehicle tab Px-2037-VOC app icon Car > Active services.
If you don't have an active subscription for connected services, press Connected services to set it up, renew, or extend it.

You can also contact your retailer or Volvo support for help. For more information, see:

Once you have an active subscription, you'll have app access to the vehicle.

 Note

You can give other drivers Volvo Cars app access to your vehicle by sharing it with them. You can only share app access from an owner profile, which is the profile assigned to the first person that connects their app to the vehicle. All drivers need to create their own Volvo ID as it is personal.

For more information about sharing app access, see:

Applicable models

S60, S60 Twin Engine/Recharge, model year 2019-2022

S90, model year 2017-2021

S90 Twin Engine/Recharge, model year 2018-2021

V60, V60 Cross Country, V60 Twin Engine/Recharge, model year 2019-2022

V90 Twin Engine/Recharge, model year 2018-2021

V90, V90 Cross Country, model year 2017-2021

XC40, model year 2018-2024

XC40 Twin Engine/Recharge (plug-in hybrid), model year 2019-2024

XC60, XC60 Twin Engine/Recharge, model year 2018-2021

XC90, XC90 Twin Engine/Recharge, model year 2016-2022

All cars

Switching between connected vehicles in the Volvo Cars app

If you've connected the Volvo Cars app with more than one vehicle, you can switch between them in two ways.

Via the profile tab:
Go to the profile tab Px-2037-VOC app icon Profile > Your cars.
Select the vehicle you want to switch to and press Select car.
Via the home screen:
Go to the home tab Px-2037-VOC app icon Home and press the down arrow symbol next to the car's name.
Select the car you want to switch to.