Bulbs – headlight housing

The entire headlight housing must be lifted out when replacing all front bulbs.

Removing the headlight housing

Ikon röd pil 1Pull out the headlight housing's locking pins.

 Important

When disconnecting the connector, pull on the connector itself and not on the wiring.
Ikon röd pil 3 Unplug the wiring connector by holding down the clip with your thumb.
Ikon röd pil 4Pull the connector out with the other hand.
5.Lift out the headlight housing and place it on a soft surface to avoid scratching the lens.
6.Replace the defective bulb(s).