Replacing the low beam headlight bulbs
The low beam bulbs in the halogen headlights can be changed without the help of a workshop.
Before the bulbs can be replaced, the plastic covering over the headlight must be removed.
Important
Never touch the bulb glass with your bare fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which may damage it.
Remove the low beam rubber cover from the headlight housing.
Remove the connector from the bulb.
Remove the bulb by pressing it slightly upward and then pulling it out.
Insert the new bulb in the socket. The bulb's guiding pin should point straight up.
Press the connector into place.
Put the rubber cover back in place.