Removing the plastic cover to replace bulbs

The headlight bulbs can be replaced without the assistance of a workshop, but before a bulb can be replaced, the plastic cover over the headlight needs to be removed.
P5-1617-S90/V90 Seal carrier removal
Release the pins in the plastic cover's four clips by pressing them down with a screwdriver or similar object and remove the covering.

 Note

To bear in mind when refitting the covering:

  • The pin in the clip must be pressed back completely before the clip is reinstalled in the covering.
  • When the covering is reinstalled, the pin must be pressed in until the end surface is level with the surface of the clip.