Activating and deactivating the parking brake
Use the parking brake to help keep the vehicle stationary when it is parked.
Activating the parking brake
Pull up the control.
The symbol in the instrument panel will illuminate when the parking brake is activated.
Make sure the vehicle is stationary.
Symbol in the instrument panel
Automatic activation
The parking brake is applied automatically
- when the gear selector is moved to P on a steep hill.
- if automatic brake when stationary (Auto Hold) is activated and
- the vehicle has been stationary for a prolonged period of time (5-10 minutes).
- the vehicle is switched off.
- the driver has left the vehicle.
Emergency braking
In an emergency, the parking brake can be activated when the vehicle is moving by pulling and holding up the control. The brakes will then be applied with force in order to brake the vehicle. The braking process is canceled when the control is released or if the accelerator pedal is depressed.
Note
In case of emergency braking at high speeds, a signal sounds during the brake procedure.
Deactivating the parking brake
Deactivating manually
The parking brake can only be deactivated if the engine is running.
Depress the brake pedal firmly.
Press the control down.
The parking brake will release and the symbol in the instrument panel will go out.
Deactivating automatically
Start the vehicle.
Depress the brake pedal firmly. Choose gear selector position D or R and depress the accelerator pedal.
The parking brake will release and the symbol in the instrument panel will go out.
Note
For automatic deactivation to be possible, the driver's seat belt must be buckled or the driver's door closed.