Replacing the rear fog light bulb
The rear fog light is located in the rear bumper on the driver's side.
Remove the fog light unit on the driver's side by inserting a flat object (e.g. a screwdriver) behind the light kit's narrower short side and prying out the fog light unit.
Unplug the connector.
Remove the bulb holder by turning it counterclockwise and pulling it out.
Remove the bulb by pressing it in and turning it counterclockwise.
Insert the new bulb by pressing it in and turning it clockwise.
Put the panel back in place and turn it clockwise.
Plug in the connector.
Insert the hook on the wide part of the fog light unit in the rear bumper and rotate the unit until the clips fasten into place.
Note
Exterior lighting such as headlights and taillights may develop temporary condensation on the inside of the lens. This is normal, and all exterior lighting is designed to resist this. Condensation is normally vented out of the lamp housing once the light has been lit for some period of time.