To be able to charge, the phone must have wireless charging (Qi) capability. Phones not equipped with a wireless charging receiver can often be supplemented with a shell that enables wireless charging.
This device complies with 47CFR part 15 of FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Warning
Wireless charging can affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
To use the wireless charging plate:
Remove all objects from the charging pad and place the phone in the center of the pad.
The phone will begin charging and the 
symbol will appear at the top of the center display.
symbol will appear at the top of the center display.Important
Do not place cards with NFC (Near Field Communication), e.g. debit cards for contactless payment, next to the phone. This type of card could be destroyed during charging.
Note
Some cellular phones may become warm during wireless charging. This is normal.
If the phone is not charging:
- Make sure there are no other objects on the charging pad.
- Make sure the phone supports wireless charging (Qi).
- If the phone has a phone case, remove it.
- Lift up the phone and then put it back on the center of the charging pad.
- Make sure the ignition is on.
- Make sure the phone hasn't slid off the charging pad while driving.
- If the temperature of the battery becomes too high while charging, the charging function will be switched off.
- If any of the doors are opened, charging will stop for a few seconds.
- Deactivate the NFC (Near Field Communication) feature if the phone has this.
If an object is preventing charging on the charge pad, a message will be shown in the center display.
Important
Keep cellular phones and charger stations away from other objects while charging to help avoid overheating.