Speed limit and speed camera warnings from Road Sign Information*
There are subfunctions for Road Sign Information (RSI1) that can alert the driver if the speed limit has been exceeded or if there are speed cameras nearby.
The function is available in certain markets.
Speed limit warning
When Speed Warning is activated, the symbol for the current speed limit in the instrument panel2 will flash temporarily if that speed is exceeded.
The driver can be alerted if the vehicle is exceeding a detected speed limit and is approaching a speed camera.
Speed Warning alerts the driver if the vehicle's speed has exceeded the current speed limit or stored Speed Limiter speed. The warning will be repeated once after about 30 seconds in that speed limit area if the driver does not slow down.
An additional warning will not be provided unless the vehicle's speed is reduced by at least 5 km/h(3 mph) and then exceeds the speed limit again or the vehicle enters an area with a different speed limit.
Speed camera warning
Vehicles equipped with Road Sign Information and map data3 can provide information about upcoming speed cameras in the instrument panel, provided that the navigation map for the relevant area contains information on speed cameras.
If the vehicle exceeds a detected speed limit with the Speed Warning function activated, the driver is given a speed warning when the vehicle is approaching a speed camera if the navigation map for the vehicle's current location contains information on speed cameras.