Activating auto-hold brake when stationary (Hold)
The function is activated automatically at a standstill if gear position D or R is selected and
- One Pedal Drive has mode On or Auto activated.
- the vehicle is at risk of starting to roll.
or
- One Pedal Drive is Off
- the vehicle is kept stationary with the brake pedal and the pedal is then depressed further.
Deactivating auto-hold brake when stationary (Hold)
The function is released when the driver presses the accelerator pedal with a gear position selected.
Note
Auto-hold brakes are also deactivated when the driver moves the gear selector to Neutral position.
The parking brake is applied automatically
- if the vehicle is switched off.
- when the driver removes their seat belt and/or opens the driver's door.
- if the function is active and the vehicle has been stationary for a long period of time (about 5-10 minutes).
Hold brake when stationary (Hold) can also switch over to the parking brake in other situations.
Symbols in the instrument panel
| Symbol | Meaning |
|---|---|
 | The symbol is illuminated when hold brake when stationary (Hold) is activated and is keeping the vehicle stationary. Note that auto-hold brake when stationary (Hold) may be activated even when the symbol is not illuminated. |
  | This symbol illuminates when the function is using the parking brake to keep the vehicle stationary. |