Road Sign Information with Speed Warning and Settings

Speed Limit Warning warns the driver if the vehicle's speed has exceeded the applicable speed limit or the preset Speed Limiter speed. The warning will be repeated once after about 30 seconds in that speed limit area if the driver does not slow down.

An additional warning will not be provided unless the vehicle's speed is reduced by at least 5 km/h (3 mph) and then exceeds the speed limit again or the vehicle enters a new/different speed limit area.

When Speed Warning is activated, the symbol for the current speed limit in the instrument panel2 will flash temporarily if that speed is exceeded.

The driver can be alerted if the vehicle is exceeding a detected speed limit and is approaching a speed camera.

Settings

Adjusting the Speed Warning limit

The driver can adjust the settings to be alerted at a higher speed than the posted speed limit.

To adjust the Speed Warning limit:

Select Settings → My Car → IntelliSafe → Road Sign Information in the center display's Top view.

Mark Speed Limit Warning.

The function is activated and a speed limit selector is displayed.

Tap the up/down arrows on the screen to adjust the speed at which the Speed Warning will be given.

Please note that the set warning limit will not be used when a speed camera symbol is displayed in the instrument panel.

Speed camera warning On/Off

If the vehicle is equipped with Sensus Navigation* and map data contains information on speed cameras, the driver can choose to receive an audible alert if the vehicle is approaching a speed camera.

To adjust the audible alert settings:

Select Settings → My Car → IntelliSafe → Road Sign Information in the center display's Top view.

Select/deselect Speed Camera Audio Warning to activate/deactivate the speed camera audible alert.