Activating Park Assist Camera

The Park Assist Camera (PAC1) is automatically activated when reverse gear is engaged or can be started manually using one of the center display's function buttons.

Camera view when backing up

When reverse gear is engaged, the screen shows the rear view2.

Camera view when manually activating the camera

P5-1917-Park Assist Camera button

Activate the Park Assist Camera using this button in the center display's Function view. The screen will first show the most recently used camera view. However, each time the engine is started, the previous side view will be replaced by the 360° view and a previously displayed zoomed-in rear view will be replaced by the regular rear view.

  • Illuminated button – the function is activated.
  • Extinguished button – the function is deactivated.

Automatically deactivating the camera

Front view switches off when the vehicle's speed reaches 25 km/h (16 mph) to help avoid distracting the driver. It will be automatically reactivated if the vehicle's speed falls below 22 km/h (14 mph) within 1 minute as long as the vehicle's speed has not exceeded 50 km/h (31 mph).

Other camera views switch off at 15 km/h (9 mph) and are not reactivated.

  1. 1 Park Assist Camera
  2. 2 In Canada, it is also possible to choose the 360° view. For the US, rear view is standard and cannot be changed.

Related documents