Selecting and activating speed-controlling functions
The speed-controlling functions must first be selected in the center display before they can be activated using the button on the steering wheel. This applies to cruise control (CC1), Adaptive Cruise Control (ACC2) and Pilot Assist.
Press the 
or 
button on the steering wheel keypad and scroll to the desired function.
- Cruise control:
- Adaptive Cruise Control:
- Pilot Assist:
The symbol in the instrument panel is gray – the function is selected.
When the function is selected, press 
on the steering wheel keypad to activate.
on the steering wheel keypad to activate.The symbol in the instrument panel lights up – the function starts and the current speed is stored as the maximum speed.
If the function goes into standby mode – press the 
button on the steering wheel to reactivate.
button on the steering wheel to reactivate.The speed-controlling markings in the instrument panel illuminate and the vehicle will then return to the most recently set speed.
Requirements
Certain conditions must be met in order to start any of the functions.
Cruise control
- In order to start Cruise Control from standby mode, the vehicle's current speed must be 30 km/h (20 mph) or higher.
Adaptive Cruise Control
- The driver's seat belt must be buckled and the driver's door must be closed.
- There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).
Pilot Assist
- The driver's seat belt must be buckled and the driver's door must be closed.
- The side markings of the lane must be clearly visible and detected by the vehicle.
- There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).
- The speed must not exceed 140 km/h (87 mph).
- The driver must keep their hands on the steering wheel.