Adjusting set speed for speed-controlling functions

Updated 2021-04-26

It is possible to adjust set speeds for the cruise control, Adaptive Cruise Control* and Pilot Assist* functions.

P5+6-1746 - Adaptive Cruise Control, managing speed

	: Increases the set speed
	: Reduces the set speed
	Set speed

Change a set speed by pressing the P5-1507-Cruise Control, speed limiter, increase speed symbol 5x3,5

(1) or

(2) buttons briefly or by pressing and holding them:

Brief press: Each press changes the speed in +/- 5 km/h (+/- 5 mph) increments.
Press and hold: Release the button when the set speed indicator (3) has moved to the desired speed.

The most recently set speed will be stored.

Note

For vehicles without Adaptive Cruise Control*, speed instead increases by +/- 1 km/h (+/- 1 mph) each time the button is pressed.

Pressing the accelerator pedal

If speed is increased by depressing the accelerator pedal while pressing the P5-1507-Cruise Control, speed limiter, increase speed symbol 5x3,5 (1) button on the steering wheel, the vehicle's speed when the button is pressed will be stored as the set speed.

Temporarily increasing speed using the accelerator pedal, e.g. when passing another vehicle, will not affect the setting. The vehicle will return to the set speed when the accelerator pedal is released.

Possible speed

Automatic transmission

The driver support functions can follow another vehicle at speeds from a standstill up to 200 km/h (125 mph).

Pilot Assist can provide steering assistance from near-stationary speeds up to 140 km/h (87 mph).

The lowest speed that can be set is 30 km/h (20 mph). When following another vehicle, ACC can monitor that vehicle's speed and slow your own vehicle down to a standstill, but it is not possible to set speeds lower than 30 km/h (20 mph).