Towbar hitch1*
Volvo recommends the use of Volvo towbars that are specially designed for the vehicle.
Note
The optional detachable trailer hitch may not be available in all markets or on all models. Consult your Volvo retailer.
Ball holder
Cotter pin
Towbar assembly
Locking bolt
Safety wire attachment bracket
Installing the ball holder
If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the towbar assembly.
Slide the ball holder into the towbar assembly.
Align the hole in the ball holder with the one in the towbar assembly.
Slide the locking bolt through the towbar assembly/ball holder.
Insert the cotter pin in the hole at the end of the locking bolt.
Warning
- Be sure the towbar is securely locked in position before attaching anything to it.
- Always attach the trailer's safety wire securely to the towbar's safety wire attachment bracket.
Removing the ball holder
Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/towbar assembly.
Pull the ball holder out of the towbar assembly.
Stowing the ball holder
Warning
When not in use, the detachable ball holder should always be properly stowed in the designated location under the floor of the cargo compartment.