Warning
Warning
There is a button for operating the hitch on the right-hand side at the rear of the cargo compartment. The indicator light in the button flashes or glows steadily orange while the towbar is folding in or out.
Folding out the hitch
Warning
Important
When the towbar is activated by pressing the button and put in unlocked position:
Wait at least 2 seconds before moving the towbar to locked position. If the towbar does not remain in locked position, wait a few more seconds and try again.
Do not kick the towbar.
Retracting the hitch
Press the button in the cargo compartment and release – pressing too long on the button may prevent the towbar from folding in.
Press the button in the trunk and release – pressing too long on the button may prevent the towbar from folding in.
Important
When the towbar is activated by pressing the button and put in unlocked position:
Wait at least 2 seconds before moving the towbar to locked position. If the towbar does not remain in locked position, wait a few more seconds and try again.
Do not kick the towbar.
Note
Power save mode will be activated after a short time and the indicator light will go out. The system can be reactivated by closing and then reopening the tailgate. This applies to both folding in and folding out the towbar.
If the vehicle electrically detects a connected trailer, the indicator light will stop glowing with a steady light. It will then not be possible to fold the towbar in or out.
Important
Make sure that there is no adapter in the electrical socket or removable ball section mounted when the towbar is folded in.
Remove the bicycle holder from the towbar when it is not being used.
Important
Hitch-mounted bicycle holder
Note
Before mounting the bicycle on the bicycle holder, keep in mind that:
- Do not mount more than four bicycles
- The maximum weight for the bicycle holder including bicycles is 200 lbs/90 kg. For example: holder 40 lbs + 4 bicycles at 30 lbs each = 160 lbs total > OK
Note
Important
- Never use towbar adapters or towbar extenders.
- Only use ball mount for towing. Do not mount accessories directly on the ball mount. Use accessories designed to be mounted in the towbar's square bracket. Do not use accessories designed to be secured around the ball mount
- Never use a load basket.
Loading the bicycle holder
The greater the distance between the load and the bicycle holder, the greater the load on the hitch and on the vehicle.
Keep the following points in mind:
- Mount the heaviest bicycle closest to the vehicle.
- If possible, mount the bicycles symmetrically, as close as possible to the center of the vehicle.
- Remove loose objects from the bicycle, such as baskets, batteries or child seats. This will help reduce the load on the hitch and the bicycle holder.
- Do not place a cover over the bicycle as this could lead to increased load on the hitch.