Electronic Stability Control symbols and messages

A number of symbols and messages related to Electronic Stability Control (ESC1) may be displayed in the instrument panel. Several examples are provided below.
SymbolMessageMeaning
Px-2037-iCup-Electronic Stability Control symbol
Steady glow for approx. 2 seconds

System check when the engine is started.

Px-2037-iCup-Electronic Stability Control symbol
Flashing lightThe system is actively operating.
Traction control temporarily offActive yaw control has been temporarily reduced due to too-high brake system temperature. The function will be automatically reactivated when the brakes have cooled.
Px-2037-iCup-Electronic Stability Control symbol
ESC Service required

The system is not functioning properly. Stop the vehicle in a safe location.

Check if the problem was temporary or if it persists by switching off the engine and then starting it again.

If the problem persists, contact a workshop ‒ an authorized Volvo workshop is recommended.

A text message can be erased by briefly pressing the P5–1507–Symbol-OK button button in the center of the right-side steering wheel keypad.

If the message persists, contact a workshop. An authorized Volvo workshop is recommended.

  1. 1 Electronic Stability Control