Installing and removing the cargo compartment cover*

Updated 2021-10-04

In the fully open position, the cover and the rear flap conceal objects in the cargo compartment.

Installing the cargo compartment cover

Press the end piece on one side of the cover into the retaining bracket in the side panel of the cargo compartment.

Then put the other end piece in the recess in the side panel on the opposite side.

Make sure the front flap is pointed downward behind the backrest before the cassette is put into place.

Push the end piece down on both sides, one at a time.

When a click is heard and the red marks on each end piece are no longer visible, the cover is in place. Check that it is secure.

Fitting the tailgate flap

A flap should be mounted on the tailgate when using the cargo compartment cover.

P5-1746-XC60-Installing load cover tail board step 1

Turn the flap so that the screw side faces down and guide the pin into the bracket on one side of the tailgate.

Squeeze together the flap slightly to make it easier to guide the pin into place in the bracket on the other side.

P5-1746-XC60-Installing tail board step 2

Press the two upper clips in the respective recess in the tailgate so it clicks into place.

Removing the cargo compartment cover

In retracted position:

Press the button on one of the cover's ends and lift out that end.

Carefully lift the cover up and out.

The other end will release automatically and the cover can then be lifted out of the cargo compartment.

Removing the tailgate flap

If the cargo compartment cover is not being used, the rear flap should be removed.

P5-1746-XC60-Removal of tailboard step 1

Pull the upper clips of the cover straight out of the tailgate.

P5-1746-XC60-Removal of tailboard step 2

Carefully pull the flap out of the bracket on one side of the tailgate and then the other. If necessary, press the flap together slightly to make it more flexible and facilitate removal.