Replacing the rear wiper blade

Your rear wiper blade's service life is affected by the water, dirt and debris that it sweeps off your rear windshield. The wiper blade needs to be replaced when it shows signs of wear.
Rear wiper fully lifted

Grasp the center of the wiper arm and lift it up and away from the rear windshield. You may feel some resistance halfway – this is the lock position. You need to pull the wiper arm past the lock position so that it doesn't fall back onto the windshield

Pull the lower part of the blade away from the wiper arm until it loosens.

Press the new blade into place until you hear a click.

Check that the blade is firmly attached to the wiper arm.
Fold the arm back down against the windshield.
Connect the wiper blade hose to the hose connector. Lower the plastic cover back down.

 Note

Make sure that the hose is positioned so that it doesn't get trapped or pinched when you lower the plastic cover again.