Active Bending Lights (ABL)*

Updated 2023-06-08

With ABL activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the following illustration).

p3007 ljusbild active bi-xenon ljus — Headlight pattern with the Active Bending Light function deactivated (left) and activated (right)

ABL is activated automatically1 when the engine is started.

The function can be deactivated/reactivated in the MY CAR menu system under My XC70 → Active Bending Lights or under Settings → Car settings → Light settings → Active Bending Lights.

See My Car – introduction for a description of the menu system.

Note

This function is only active in twilight or dark conditions, and only when the vehicle is in motion.

If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table.

Symbol	Display	Explanation
	Headlamp failure Service required	The system is not functioning properly and should be inspected/repaired by a trained and qualified Volvo service technician.