Cruise control (CC) – engaging and setting speed

Cruise control is designed to assist the driver by maintaining a set speed. It is primarily intended for use on long straight roads in steady traffic, such as on highways and other main roads.

Engaging the cruise control function

P3-1320-ALL-USA-cruise control
Steering wheel-mounted controls and display
  1. Ikon röd cirkel 1Standby mode
  2. Ikon röd cirkel 2Resume set speed
  3. Ikon röd cirkel 3Deactivating
  4. Ikon röd cirkel 4Activate/set speed
  5. Ikon röd cirkel 5Selected speed (gray symbol indicates standby mode)
  6. Ikon röd cirkel 6Cruise control active: white symbol (gray symbol indicates standby mode)
Before a speed can be set, the cruise control system must be engaged (put in standby mode).
Press the CRUISE button (1).
The symbol P3-820 Ikon farthållare 1 illuminates and the text (---) mph (5) indicates that cruise control is in standby mode.

 Note

Putting cruise control in standby mode does not set a cruising speed.

Setting a speed

Use the Ikon farthållare 2 or Ikon farthållare 3 buttons set the vehicle's current speed. The set speed is shown in the display.

 Note

Cruise control cannot be engaged at speeds below 20 mph (30 km/h).

Adjusting the set speed

After a speed has been set, it can be increased or decreased by using the Ikon farthållare 2 or Ikon farthållare 3 buttons.
Press Ikon farthållare 2 or Ikon farthållare 3 briefly and release the button to increase or decrease vehicle speed by approximately 1 mph or 1 km/h.
This will become the set speed when the button is released.
Press and hold one of these buttons to increase/decrease the speed in 1-mph or 1-km/h increments. Release the button when you have reached the desired speed.

 Note

  • A temporary increase in speed by pressing the accelerator pedal, for less than 1 minute (e.g. when passing another car), does not affect the current cruise control setting. The vehicle will automatically return to the previously set speed when the accelerator pedal is released.
  • If one of the cruise control buttons is kept depressed for more than approx. 1 minute cruise control is disengaged. The engine must then be switched off in order to reset cruise control.