Opening and closing the charging socket cover
The cover for the hybrid battery's charging socket opens manually.
Unlock the vehicle using the remote key.
Press in the rear edge of the charger door and release.
Open the door.
Remove the charging socket's protective cover and secure it in the holder on the inside of the charger door. Make sure the cover's rubber stopper is bent downward to prevent the cover from falling out of the holder.
Important
Make sure the charging socket's protective cover is positioned so it does not damage the paint (in e.g., windy conditions).
Perform the following steps in reverse to close the charger door.
Note
Since the hatch is locked during driving, the vehicle must be unlocked again to be able to open the hatch.