Symbol | Meaning |
---|---|
![]() | Information, see the message in the display The information symbol illuminates and a message is displayed in the instrument panel if one of the vehicle's systems requires the driver's attention. The information symbol may also illuminate in combination with other symbols. |
![]() ![]() | Fault in brake system This symbol illuminates if there is a problem with the parking brake. |
![]() ![]() | Fault in ABS system If this symbol is illuminated, the ABS system is malfunctioning. The vehicle's regular brakes will still work, but without the ABS function. |
![]() ![]() | Auto-brake on This symbol illuminates when the function is activated and the brakes or parking brakes are being used. The brakes hold the vehicle at a standstill after it has stopped. |
![]() | Tire pressure system This symbol illuminates to indicate low tire pressure. If there is a fault in the tire pressure system, the symbol will first flash for approximately 1 minute and then glow steadily. This may occur if the system cannot detect or alert the driver of low tire pressure as intended. |
![]() | Emission control system If this symbol illuminates after starting the engine, it could indicate a fault in the vehicle's emission control system. Have the vehicle checked by a workshop. Volvo recommends contacting an authorized Volvo workshop. |
![]() ![]() | Left/right turn signals The symbol will flash when the turn signals are in use. |
![]() | Parking lights This symbol illuminates when the parking lights are on. |
![]() | Fault in headlight system This symbol illuminates if a fault has been detected in the ABL (Active Bending Lights) function or another fault in the headlight system. |
![]() | Active high beams on This symbol lights up in blue when the active high beams are on. |
![]() | Active high beams off This symbol lights up in white when the active high beams are off. |
![]() | High beams on This symbol illuminates when the high beams are on or flashed. |
![]() | Active high beams on This symbol lights up in blue when the active high beams are on. Parking lights are on. |
![]() | Active high beams off This symbol lights up in white when the active high beams are off. Parking lights are on. |
![]() | High beams on This symbol illuminates when the high beams and parking lights are on. |
![]() | Front fog lights on This symbol illuminates when the front fog lights are on. |
![]() | Rear fog light on This symbol illuminates when the rear fog light is on. |
![]() | Rain sensor on This symbol illuminates when the rain sensor is on. |
![]() | Preconditioning on This symbol illuminates when the engine block/passenger compartment heater or air conditioning are preconditioning the vehicle. |
![]() | Stability system This symbol flashes when the stability system is actively working to stabilize the vehicle. If the symbol glows steadily, there is a fault in the system. |
![]() | Stability system, Sport mode This symbol illuminates when Sport mode is activated. Sport mode offers a more active driving experience. If the system detects that accelerator pedal, steering wheel and cornering movements are more active than in normal driving, it allows a certain level of controlled lateral movement of the rear wheels before intervening and stabilizing the vehicle. |
![]() | Lane Keeping Aid White symbol: Lane Keeping Aid is on and lane marker lines are detected. Gray symbol: Lane Keeping Aid is on but no lane marker lines are detected. Amber-colored symbol: Lane Keeping Aid is alerting/intervening. |
![]() | Lane Keeping Aid and rain sensor White symbol: Lane Keeping Aid is on and lane marker lines are detected. The rain sensor is on. Gray symbol: Lane Keeping Aid is on but no lane marker lines are detected. The rain sensor is on. |
![]() | Reduced performance In the event of a temporary fault in the driveline, the vehicle may go into a "limp home" mode with reduced power output to help avoid damage to the driveline. |