Shifting gears with automatic transmission
Change gear position by pushing the spring-loaded gear selector forward or rearward, or to the side for manual shifting.
Selecting gears
![P5-1917-Hybrids-gear shift pattern](https://www.volvocars.com/images/support/img4103e6885e74d81ac0a8015263382459_1_--_--_VOICEpnghigh.png?imwidth=1280)
Gear selector positions
Parking – P
![P5-1917-Hybrids-Ger shifter P](https://www.volvocars.com/images/support/img9d1bb0705e872282c0a801525b52d721_1_--_--_VOICEpnghigh.png?imwidth=1280)
Parking is activated using the P button located next to the gear selector.
In the P position, the transmission is mechanically locked.
Select P when the vehicle is parked or when starting the engine. The vehicle must be stationary when P is selected.
To move to another gear position when P position is engaged, the brake pedal must be depressed and the ignition in mode II.
When parking – apply the parking brake before shifting to position P.
Warning
Note
Help functions
The system will switch to the P position automatically:
- if the ignition is switched off while D or R is selected and the vehicle is stationary.
- if the vehicle is moving at low speed and the driver unbuckles their seat belt and opens the driver's door without any pedal being depressed.
To park a vehicle with an unbuckled seat belt and open door – end P mode by shifting to R or D again.
If the vehicle is switched off in gear position N, it will not automatically switch to the P position. This makes it possible to wash the vehicle in an automatic car wash.
Reverse – R
Select R when backing up. The vehicle must be stationary when R is selected.
Neutral – N
Select the N position when starting the vehicle. Apply the parking brake if the vehicle is stationary with the gear selector in the N position.
To move to another gear position when N is selected, the brake pedal must be depressed and the ignition in mode II.
D drive mode
D is the normal driving gear position. The transmission shifts up or down automatically depending on acceleration and speed.
The vehicle must be stationary when the gear selector is moved from R to D.
Brake – B
![P6-1846-XC40H-Gear shift mode B in driver display](https://www.volvocars.com/images/support/imgb0d848594b5fbeb4c0a801527f05af04_1_--_--_VOICEpnghigh.png?imwidth=1280)
With position B, it is possible to shift gears manually. When the accelerator pedal is released, the electric motor brakes the vehicle and the hybrid battery is recharged at the same time.
B position is selected by moving the gear selector rearward from D.
- Push the gear selector to the right toward "+" (plus) and release to shift up one gear.
- Push the gear selector to the left toward "–" (minus) and release to shift down one gear.
- Push the gear selector rearward to return to D mode.
For smooth shifting and engine performance, the transmission will shift down automatically if the vehicle's speed becomes too low for the selected gear.