Before the bulbs can be replaced, the plastic covering over the headlight must be removed.
Before the lamp can be replaced, the rectangular headlight cover must be removed.
Note
Daytime running lights/parking lights are easier to reach if the high beam headlight bulbs are removed. The high beam headlights are mounted above and to the side of the daytime running lights/parking lights. Remove the high beam headlight bulb by turning the bulb holder upward and then pulling it straight out.
Important
Never touch the bulb glass with your bare fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which may damage it.
Pull the daytime running light/parking light bulb holder straight out.
Remove the bulb by pulling it straight out.
Replace the bulb.
Position the bulb holder in the socket and push it into place.
If the high beam bulb holder has come loose, position it in the socket and turn downward.