Selecting and activating speed-controlling functions

The speed-controlling functions must first be selected in the center display before they can be activated using the button on the steering wheel. This applies to cruise control (CC1), Adaptive Cruise Control (ACC2) and Pilot Assist.

Press the P6-2037-XC40BEV-Steering wheel left buttons, left arrow or P6-2037-XC40BEV-Steering wheel left buttons, right arrow button on the steering wheel keypad and scroll to the symbol in the instrument panel for the desired function.

  • Cruise control: P5-1507-Adaptive cruise control symbol
  • Adaptive Cruise Control: P5-1946-Adaptive Cruise Control symbol small
  • Pilot Assist: P5-1946-Pilot Assist symbol small
The symbol in the instrument panel is gray – the function is selected.
When the function is selected, press P5-1507-Cruise Control, speed limiter, activates speed limiter and stores current speed symbol 5x3,5 on the steering wheel keypad to activate.
The symbol in the instrument panel lights up – the function starts and the current speed is stored as the maximum speed.
If the function goes into standby mode – press the P5-1507-Cruise control, speed limiter, activates speed limiter from standby mode symbol 5x3,5 button on the steering wheel to reactivate.
The speed-controlling markings in the instrument panel illuminate and the vehicle will then return to the most recently set speed.

Requirements

Certain conditions must be met in order to start any of the functions.

Cruise control

  • In order to start Cruise Control from standby mode, the vehicle's current speed must be 30 km/h (20 mph) or higher.

Adaptive Cruise Control

  • The driver's seat belt must be buckled and the driver's door must be closed.
  • There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).

Pilot Assist

  • The driver's seat belt must be buckled and the driver's door must be closed.
  • The side markings of the lane must be clearly visible and detected by the vehicle.
  • There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 km/h (9 mph).
  • The speed must not exceed 140 km/h (87 mph).
  • The driver must keep their hands on the steering wheel.
  1. 1 Cruise Control
  2. 2 Adaptive Cruise Control