Adjusting loading mode
Use the buttons in the cargo compartment to raise or lower the rear section of the vehicle to facilitate loading or unloading the vehicle or connecting or disconnecting a trailer.
Use the buttons in the cargo compartment to adjust the height of the rear section of the vehicle to facilitate loading and unloading.
Center display settings
Easy Entry and Exit Suspension Control
The vehicle can be lowered to make it easier to get in and out.
Activating easy entry in the center display:
Tap Settings in the Top view.
Tap .
Select Easy Entry and Exit Suspension Control.
When the vehicle is parked and the engine is turned off, the level is lowered. (Level adjustment will stop if a side door is opened and will resume after a slight delay when the door has been closed.) When the engine is started and the vehicle begins to move, the level will be raised to the height set by the selected drive mode.
Disable Leveling Control
In certain situations this function must be turned off e.g. before the vehicle is raised using a jack*. The level difference caused by raising the vehicle with a jack could cause problems with the pneumatic suspension.
Turning off the function in the center display:
Tap Settings in the Top view.
Tap .
Select Disable Leveling Control.