Washing the car in an automatic car wash
Volvo recommends that you wash the car by hand so that you can properly reach all parts of the car. However, an automatic car wash is a simple way to quickly clean your car as soon as it gets dirty.
Note
Volvo recommends that you do not use an automatic car wash during the first few months, when the car is still new. This allows the paintwork to harden properly.
Important
Before using an automatic car wash
- Make sure that doors, windows, hatches and the panoramic roof are closed.
- Change wiper mode to off.
- Secure any auxiliary lights.
- Activate air recirculation.
- Disable auto hold so that the car does not automatically brake or give unnecessary warnings.
- Open the parking view.
Follow the instructions to drive into the automatic car wash and stop at the designated location.
If you are using a tunnel car wash:
- Put the gear in N and take your foot off the brake. Turn the engine off but do not apply the parking brake.
If you are using a rollover car wash:
- Put the gear in P to engage the parking brake.
When the wash is complete, follow the instructions and drive out.
Be sure to reset any functions you changed before you drove in.
Warning
Always test the brakes after washing, including the parking brake. This helps prevent moisture from causing corrosion, which could reduce the brakes' performance.
If there are particularly stubborn dirt patches or if you don't get the desired result when cleaning your car, contact Volvo support for advice.